WAGNER F300 Manual Del Proprietário página 10

EN
Accessories
The following accessories may come with the Heat Gun or may be purchased separately www.wagner-group.com/service.
Alternatively see back of manual for your nearest Service Centre.
Name
Concentrator
Nozzle
P/N2366222
Wide Concentrator
Nozzle
P/N2366223
Name
5
4
1+2
3
IMPORTANT: Always use gloves when handling the Heat Gun
To attach an optional item to the Heat Gun:
1. Set the Heat Gun upright on a level surface and wait until the tip is
cool.
2. Set the item onto the tip of the Heat Gun and push firmly into place
by hand.
10
Description
Directs a concentrated heat
flow to the work surface. Ideal
for removing paint in awkward
corners, crevices, mouldings,
beading or architraves.
Directs a long, narrow heat pattern
to the work surface. Ideal for
removing paint or varnish from
large, flat surfaces such as skirting
boards, doors, stairs, etc. It should
be used in conjunction with a flat
scraper.
5-in-1 Detailed
Scraper Tool
P/N2366227
Name
Glass Protection
Nozzle
P/N2366224
Reflector Nozzle
P/N2366225
Description
This tool has 5 functions. The blade is used to (1) scrape paint and (2) spread
compound. The gouge point (3) is used to remove putty/caulk from open
cracks. The curved area (4) is used to clean roller covers. The flat side (5) can be
used to open paint tins.
To remove an optional item from the Heat Gun:
1. Set the Heat Gun upright on a level surface and wait until the tip is
cool.
2. Pull the item off the tip.
FURNO 300
Description
Deflects the heat away from
glass or other fragile areas. Ideal
for window sills, ledges, frames
and skirting boards.
Disperses the heat flow evenly
around the whole work surface.
Ideal for thawing frozen pipes,
solder pipe work, bending
plastics or heat shrinking
electrical insulating tubing.