Component Description - WAGNER F300 Manual Del Proprietário

EN

Component Description

Features Fig 1
1) Mode selector switch
a) 0 (OFF)
b) 1 (LOW)
c) 2 (HIGH)
2) Hanging hook
3) Handle stabilizers & cordset (removable with tool)
4) Rear stabilizer fins (stand)
Fig 1
1
a
6
4
2 3
b c
Attaching the cordset
The cordset (Fig. 2, 1) for the Heat Gun is delivered detached from
the gun (Fig. 2, 2). To attach, line up the cord with the socket on the
handle of the gun and press firmly together until you hear a click. The
cord set does not need to be removed. If required to detach, insert a
small screwdriver or similar tool (Fig. 2, 3) into the hole as shown (Fig.
2, 4). Once resistance is felt on the end of the tool, apply pressure to
depress the release mechanism. Firmly pull the cordset away from the
gun.
Fig 2
2
1
FURNO 300
3
4