Replacing The Power Supply Cable - De Dietrich DTE714X Manual De Instalación Y Utilizacion

INSTRUCTIONS FOR THE INSTALLER
MAINTENANCE

Replacing the power supply cable

If the power supply cable should be replaced,
Fig.10
type HO5VV-F or H05RR-F, complying with the
regulations in force.
The connection to the terminal board must be
effected as shown in fig.10:
it is necessary
brown cable L
to use a cable
blue cable N
with a section
green-yellow cable
2
o f 3 x 0 . 7 5 m m
for the version
all gas and 3x1
2
m m f o r t h e
version mixed,
8
(phase)
(neutral)
(ground)