Adjusting The Door Opening Angle - Gaggenau RC 462 Instrucciones De Instalación

2. Slide the covering strips on the longitudinal side into
the gap between the furniture door (a) and the glass
pane (b).
3. Cut the covering strips of the shortest sides to the
required length.
4. Push cover strips into the gap between the furniture
door (a) and glass pane (b).

Adjusting the door opening angle

Depending on the installation situation, it may be
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
1. Open door to 90°.
Insert the banking pin through the boreholes which are
now vertically aligned and drive in with a hammer.
35