Scope Of Delivery - Brita PURITY 1200 Clean Manual De Instrucciones

•
Production date:
Production code sticker fi lter cartridge and packaging - Example: B715002010
7 Production year, here: 2007
15 Production week, here: calendar week 15
002 Batch No. fi lter medium, here the second batch fi lled in terms of quantity
010 Serial number of the fi lter cartridge, here the tenth cartridge from the second batch
Production code sticker connector head - Example: 7102 XX
7 Production year, here: 2007
10 Production week, here: calendar week 10
2 Production day from Monday (1) to Friday (5), here: Tuesday
xx Internal code
Production date pressure vessel and pressure vessel lid - Example: 0307
03 Production month, here: March
07 Production year, here: 2007
3.5 Technical Safety Assembly Instructions
• The terminal device operated with the fi lter must be free of limescale prior to
installation.
!
the fi lter system.
• Protect the fi lter system from sunlight and mechanical damage. Do not assemble
near sources of heat and open fl ames.
• A stop valve must be installed before the fi lter system intake hose.
• If the water pressure is higher than 6 bar, a pressure reducer must be installed before
the fi lter system.
• A non-return valve tested by the DVGW has been factory-installed at the water intake
of the fi lter head.
• No copper pipes and no galvanised or nickel-plated pipes/connectors may be
installed between the water fi lter and the consumer. The use of Brita hose sets is rec-
ommended here. When choosing the material for parts that come into contact with
water after the BRITA fi lter system it must be remembered that, due to the process,
decarbonised and/or fully demineralised water contains free carbon dioxide.
• All parts must be installed in accordance with the country-specifi c guidelines on the
installation of drinking water facilities.
4 Installation
Caution: Prior to installation read the technical data (Chapter 10) and the operating
!
and safety information (Chapter 3). After the product has been stored at temperatures
below 0 °C, it must be stored (with the original packaging open) at the ambient
temperature of the place of installation for at least 24 hours before use.

4.1 Scope of Delivery

Prior to installation, remove the entire delivery scope from the packaging and
check that everything is there:
1x pressure vessel
1x pressure vessel lid
Caution: No water softening system may be operated upstream from
1
3
13