Parameters Menu; Decoders Menu - Fermax MDS DIRECT Manual De Instalación

Parameters Menu

2
Menu Parametros
Parameters Menu
1- Tiempo Minimo
2- T. Convers.
1- Minimum Time
3- Idioma
2- Convers. Time
3- Language
B- Salir
B- Exit
NOTE: In door entry or video-door entry installations, the timing programmed
in the MDS-City or MDS Direct panel prevails over these.

Decoders Menu

3
Decoders Menu
Menu Decoders
1- Pr. Individual
1- Individual Prog.
2- Pr. Secuencial
3- Cambio Codigo
2- Secuential Prog.
4- Pr. Telefono
3- Change of Code
4- Prog. Telephones
B- Salir
B- Exit
Page 6
In this menu, you can modify the operating parameters
of the Guard Unit, such as the conversation times and
the language of the information shown on the screen.
1- Minimum Time
Defines the minimum time, in seconds, during which
no one, except the Guard Unit, can interrupt a
communication. You can choose values between 10
and 60 seconds.
2- Conversation Time
To modify the maximum time a conversation can last,
between 10 and 250 seconds. See note.
3.- Language
1: Spanish, 2: English, 3: French, 4: German.
By means of this menu, you can assign the apartment
number to each one of the telephones, monitors or
intercommunication panels by programming the
decoders.
1- Individual Programming
To programm the outputs of a decoder one by one.
Once this option has been selected, the steps to follow
are:
1. Press the programming button on the decoder you
wish to programm. See instructions of the decoder
itself.
The type of decoder will appear in the upper line of
the display:
- ISO:4-output Isodecoder
- AUDIO-4: 4-output audiodecoder
- AUDIO-8: 8-output audiodecoder
- PANEL-4: 4-output panel decoder