Tabla de contenido
Publicidad
Kit VIDEO PRIVATE
Kit VIDEO PRIVATE
Reset of Parameters
It is possible you want to recover the reader's original configuration; to make
it easier, a Parameters Reset function has been added, wich returns the device
to the factory settings and deactivates it.
To Reset the reader, proceed as explained on previous page on MASTER
Card Reset but instead a new card use the current MASRER Card.
Once done the Reset all users are erased, parameters return to default
configuration and the MASTER Card is deactivated.
NOTE:
The Reset is a not reversible operation, then once it is done you will lose all
information and you will not recover it.
NOTE:
It is also possible to program cards (and delete) by means of the
PROGRAMMING KEYPAD REF 2306 or by means of a PC and the WINPROX program
developed by FERMAX.
CONTACT YOUR NEAREST DISTRIBUTOR FOR FURTHER DETAILS.
Pag 30
Publicidad
Tabla de contenido
