Oven Assembly - Blodgett SG2136 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 247
Installation

Oven Assembly

OVEN SUPPORTS
1. Bolt the leg/caster assemblies to the oven with
3/8-16 hex head bolts, lockwashers and
washers.
On gas models attach the restraint bracket to
the left rear leg as shown in Figure 4.
NOTE: Install the locking casters on the front
of the oven. The front of the oven con-
tains the front access door.
Strain Relief
Bracket
Single and Double Stacked Units
2. Have several persons carefully lift the oven off
3. Engage the brakes on the front casters.
Front of
Oven
Strain Relief
Bracket
Left rear leg and strain relief bracket shown
Figure 4
8
the pallet and set it onto the casters.
Front of
Oven
Triple Stacked Units

Publicidad

Tabla de contenido
loading

Tabla de contenido