DHC BT2100 Manual De Usuario página 12

The tested battery is bigger than 3000 SAE (CCA) or the connection is
not established. Check the capacity of the battery & make sure the
clamps are properly connected.
CHECK CLAMP
The connection between battery and cable set is
loosed, please check cable clamp.
INTERNAL BATTERY LOW
Please change new AA batteries.
NO PAPER
Please insert new paper row.
VOLTAGE HIGH
The voltage of tested battery is too high and cannot
be measured.
VOLTAGE UNSTABLE
The voltage of tested battery is unstable Please switch
off the engine, wait for 90 second and retest.
SYSTEM TEST
- -
11