DHC BT2100 Manual De Usuario página 8

1. The battery has at least one cell short circuit.
It should be replaced immediately.
2. Add RO# and VIN#? YES or NO. Select YES to
enter RO number and vehicle plate number.
3. Press ENTER to print the result.
NOTE: Under certain conditions the follow messages may be displayed.
LOAD ERROR
The tested battery is bigger than 3000 SAE (CCA) or
the connection is not established. Check the capacity
of the battery & make sure the clamps are properly connected.
CHECK CLAMP
The connection between battery and cable set is
loosed, please check cable clamp.
INTERNAL BATTERY LOW
Please change new AA batteries.
- -
7