DHC BT2100 Manual De Usuario página 17

properly. If there are no connection issues, replace the regulator.
Since most alternators have the regulator built-in, this will require you
to replace the alternator.
1. When the test is completed,
the display shows the results
as following.
2. Press ENTER to print the
result.
IR TEST
Press the ◄ ► key to select IR TEST.
1.
Press the ◄ ► key to confirm the battery
2.
voltage.
Press the ◄ ► key to confirm if the battery
3.
has been charged recently.
4. If the battery has NOT been
charged, please select "NO"
to recharge and retest the
battery.
If the battery has been charged, please select "YES" and proceed
the test.
- -
16