Machine Description; Terra 128B Sweeper Operation Capabilities; Technical Data - Nilfisk-Advance Terra 128B Manual De Uso

OPERATOR MANUAL

MACHINE DESCRIPTION

TERRA 128B SWEEPER OPERATION
CAPABILITIES
The TERRA 128B Sweeper is designed and construct-
ed to sweep non-hazardous dust or light debris on
smooth and solid floors, light carpeting, in civil or indus-
trial environments, under safe operating conditions by
a trained Operator.
Note:
Forward, backward, front, rear, left or right
are intended with reference to the opera-
tor's position, with the hands on the han-
dlebar (3, Fig. C).
Control panel
(See Fig. B)
1. Control panel
2. Ignition key
3. Discharged battery warning light
4. Semi-discharged battery warning light
5. Charged battery warning light
6. Display
7. Display selection button: hour counter/ hour and
minutes counter / battery voltage (V),
8. Filter shaker push-button (optional)
9. Panel fastening screws
Exterior general overview
(See Fig. C)
1. Serial number plate / technical data
2. Side broom latch
3. Handlebar
4. Drive lever
5. Knobs to adjust the handlebar inclination
6. Can holder
7. Hood
8. Rear wheels
9. Pivoting front wheel
10. Side broom
11. Main broom
12. Side broom lifting and adjusting knob
13. Left side skirt
14. Right side skirt
15. Front skirt
16. Rear skirt
17. Hopper
18. Hopper latch
19. Hopper handle
20. Manual filter-shaker handle
21. Main broom access door
22. Left main broom height adjuster
4
23. Right adjuster of the main broom height
24. Main broom right door
25. Main broom right door fastening screws
26. Pedal brake on front wheel (optional)
Under hood
(See Fig. T)
1. Hood (open position)
2. Batteries
3. Battery connector
4. Electronic battery charger
5. Battery charger power cord
6. Circuit breaker
7. Side broom motor fuse
8. Battery caps (Lead-acid battery)
9. Lead (WET) or gel (GEL) battery selector switch
(positioned on the optional electronic battery
charger)
10. Battery connection diagram
11. Charged battery warning light
12. Main broom belt
13. Drive belt
14. Drive pulley for main broom
15. Drive pulley for rear wheels
16. Fan
17. Main electric motor
18. Signal circuit fuse
19. Hood opening switch
20. Serial number plate / technical data
21. Ground connection chain

TECHNICAL DATA

Dimensions
Cleaning width
(without side broom)
Cleaning width
(with side broom)
Machine length
Machine width,
(without side broom)
Height when the
handlebar is lowered
Minimum height from ground
Handlebar height, (minimum/
maximum)
Main broom size
Side broom size
Max speed
Maximum slope
Hopper capacity
Machine total weight
(without battery)
Front wheel, steering
Values
500 mm (19.69 in)
700 mm (27.6 in)
1070 mm (42.13 in)
667 mm (26.26 in)
836 mm (32.91 in)
40 mm (1.6 in)
824/1120 mm
(32.4/44 in)
ø 245 x 500 mm
(9.65x19.69 in)
ø 347 mm (13.7 in)
4.24 Km/h (2.63 mph)
2 %
3
40 l (1.4 ft )
94,78 Kg (210.62 lb)
ø 125/37.5-50 mm
(4.92/1.48-1.97 in)
146 0596 000(4)2004-02