Design Guide - Standard Installation
1/4" (0.63 cm) FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be cut to the
dimensions shown. The panels will slide into the frame on the door
and grille.
If the custom panel is less than 1/4" (0.63 cm) thick and if it fits
loosely in the door frame, it can be backed up with a piece of filler
material or foam tape to improve the fit.
IMPORTANT NOTE: Maximum weight for door panel is 67 pounds
(30 kg). Maximum total weight for assembled grille panel is 11
pounds (5 kg).
3/4" (1.9 cm) OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed
on trimmed models. The overlay panel must be secured to a 1/4"
(0.63 cm) thick backer panel which slides into the trim. A spacer
panel 0.10" (0.25 cm) thick must be placed between the overlay
and backer panel.
IMPORTANT NOTE: Maximum total weight for assembled door
panel is 67 pounds (30.39 kg). Maximum total weight for assem-
bled grille panel is 11 pounds (4.99 kg).
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to right and top
to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay panel and
secure with glue and screws. Screws must be countersunk into
the backer panel.
Framed Panel Dimensions
1/4" (0.63 cm)
Framed Panel
33-7/8" (86.04 cm)
Overlay Panel Dimensions
1/4" (0.63 cm)
Backer Panel
33-7/8" (86.04 cm)
0.10" (0.25 cm)
32-1/2" (82.55 cm)
Spacer Panel
3/4" (1.9 cm)
34-1/8" (96.67 cm)
Overlay Panel
Door
A (Width)
B (Grille Height)
8-7/8" (22.54 cm)
A (Width)
B (Grille Height)
8-7/8" (22.54 cm)
7-5/8" (20 cm)
9" (22.86 cm)
NOTE: Left-to-right offset is not
always equal to top-to-bottom offset.
10
5/16"
Trim
Reveal
1/4"
Panel
C (Door Height)
69-5/16"(176.05 cm)
C (Door Height)
69-5/16"(176.05 cm)
67-15/16"
(172.56 cm)
69-9/16"
(176.69 cm)
31-1000416 Rev. 0