SKF TKSA 20 Manual De Instrucciones página 14

b) Aim the laser lines so that they hit in the centre of the target of the opposite
measuring unit (fig. 11).
Fig. 11. Hit the target
A Laser line
c) For coarse adjustment release the measuring unit by unlocking the knob on the side
of the unit (fig. 12). This allows the measuring unit to slide up and down the rod at the
same time as it can swivel freely. For the fine adjustment in height use the adjustment
wheels on the measuring units.
Fig. 12. Adjustment mechnism
A Vertical positioning of measuring unit
B Horizontal rotation of measuring unit
C Vertical fine adjustment of laser
SKF TKSA 20
C
13