Thank You; What Your Headset Can Do - Jabra BT 160 Manual Del Usuario

Thank you

Thank you for purchasing the Jabra BT160 Bluetooth® Headset. We hope
you enjoy it!
This instruction manual will get you started and ready to make the most of
your headset.
!
Remember, driving comes first, not the call!
Using a mobile phone while driving can distract you and increase the
likelihood of an accident. If driving conditions demand it (such as bad weather,
high traffic density, presence of children in the car, difficult road conditions),
pull off the road and park before making or answering calls. Also, try to keep
conversations short and do not make notes or read documents.
Always drive safely and follow local laws.
About your Jabra BT160
1 LED light
Blue indicates mode
(pairing, active or standby)
and battery charging
Red indicates low battery level
2 Volume up ( + ), volume down ( – )
3 Charging socket
4 Answer/end button
Press and hold to turn headset on
Press and hold to turn headset off
Tap to answer or end a call
Press this, and press volume up ( + ) button at same time, to put
headset in pairing mode
5 Earhook – gently flip and rotate 180° to fit left ear. (See fig. 2)
6 Plastic cover plate
2
4
1
3
5

What your headset can do

Your Jabra BT160 lets you do all this:
•
Answer calls
•
End calls
•
Reject calls (phone dependent)
Specifications:
•
Talk time/standby time up to 8 hours talk time (subject to phone),
110 hours standby
•
Rechargeable battery with charging option from AC power supply or car
charger (not included)
•
Weight 0.56 oz (16 g)
•
Operating range up to 33 feet / 10 m
•
Headset and hands-free Bluetooth profiles
•
1
Bluetooth
Changing the design
6
To insert your preferred design in your Jabra BT160:
1 Gently remove the plastic cover plates and current design.
2 Gently press out your preferred design from the sheets enclosed.
3 Add you preferred design and gently clip the plastic cover plate back
into place.
See illustrations below for further guidance.
2
•
Voice dialing (phone dependent)
•
Last number redialing
specification (see glossary) version 1.2
3