Tuning In Strong Signals; Storing The Strongest Broadcast Frequencies - Pioneer AVH-P6400CD Manual De Instrucciones

Tuner

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press 5 or ∞ in the TUNER MENU to
select , and press
LOCAL A.MENU
LOCAL adjustment indications are displayed.
2 Press 2 or 3 to set the sensitivity
There are four levels of sensitivity for FM and
two levels for AM:
— — — —
FM: OFF 1 2 3 4
— —
AM: OFF 1 2
The setting allows reception of only the
4
strongest stations, while lower settings let you
receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (Best Station Memory) lets you automati-
cally store the six strongest broadcast frequen-
cies. The stored frequencies are displayed.
Once stored in memory, you can easily select a
.
desired frequency from the displayed list (refer
to page 22).
.
1 Select
press
A.MENU
BSM adjustment indications are displayed.
2 Press 5 to turn
begins to flash. While
BSM
six strongest broadcast frequencies will be
stored in order of their signal strength. When
finished,
• To cancel the storage process, press ∞
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
• You can also use 5 and ∞ to recall radio sta-
tion frequencies assigned to
buttons.
• If there are fewer than six strong broadcast
frequencies, previously stored frequencies
may remain in memory.
from the TUNER MENU, and
BSM
.
on.
BSM
is flashing the
BSM
stops flashing.
BSM
PRESET TUNING
Section
05
.
23
En