Introduction Of Advanced Tuner Operation; Storing Broadcast Frequencies - Pioneer AVH-P6400CD Manual De Instrucciones

Section
Tuner
05
Introduction of advanced tuner
operation
1
1
display
FUNCTION
Shows the function status.
1 Press when TUNER source indica-
A.MENU
tions are displayed.
MENU is displayed.
2 Select and press
TUNER
TUNER MENU indications are displayed as
follows:
(best stations memory)
BSM
(local seek tuning)
LOCAL
(preset channel memory)
P.CH MEMORY
• Select in the MENU display or press
BACK
to return to the previous display.
BACK
Pressing on the main unit returns you to
WIDE
the previous display.
• To return to the frequency display, press both
and
BAND/ESC DISP
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
22
En
.
A.MENU
.

Storing broadcast frequencies

You can easily store up to six broadcast frequen-
cies for later recall with 5 or ∞.
1 Press 5 or ∞ to select
P .CH MEMORY
the TUNER MENU, and press
P.CH MEMORY adjustment indications are dis-
played.
2 Adjust frequency with 2 or 3.
If you continue pressing 2 or 3, a strong broad-
cast frequency is automatically searched for,
and search ends when it is found.
3 Select a preset channel number with 5 or
∞ and press
to preset that frequency.
A.MENU
4 If you want to preset frequencies one after
another, use 5 or ∞ to move to the next preset
channel you want to use to store a frequency,
and perform the same operation.
When you have finished, press
return to the source display.
The number you have pressed will flash in the
indicator and then remain lit.
PRESET NUMBER
The selected radio station frequency has been
stored in memory.
You can use 5 and ∞ to recall radio station
frequencies assigned to
P1-6
from
.
A.MENU
to
BAND/ESC
(P.CH MEMORY).