Initial Settings
Adjusting initial settings
1
Initial settings lets you perform initial set up of
different settings for this unit.
1
display
FUNCTION
Shows the function status.
You cannot select AUDIO MENU from the OFF
SOURCE MENU.
1 Press
and hold until the unit turns
SOURCE
off.
2 Press
and the OFF SOURCE
A.MENU
MENU is displayed.
3 Press 5 or ∞ to select
INIT
.
A.MENU
(FM tuning step)
FM STEP
(Priority function)
DAB PRIORITY
(Auto PI seek)
RDS AUTO PI
(Warning tone)
DETACH WARNING
(Auxiliary)
AUX
(Illumination color)
ILLUMINATION
(Rear output and subwoofer)
REAR SP
(Telephone muting)
TEL MUTE/ATT
You can operate a desired function. For details,
refer to the pages for each of the functions.
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
on the remote control.
WIDE
Switching the warning tone
If the operation panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can turn
off this warning tone.
1 Press 5 or ∞ to select
from the INIT MENU, and press
DETACH WARNING adjustment indications are
displayed.
2 Select
Pressing 5/∞ will switch
ON and OFF
(e.g.,
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
, and press
1 Press 5 or ∞ to select
MENU, and press
AUX adjustment indications are displayed.
2 Select
Pressing 5/∞ will switch
and that status will be displayed (e.g.,
OFF
AUX :ON
or
BAND/ESC
DETACH WARNING
ON or OFF with 5/∞.
WARNING:
WARNING
and that status will be displayed
).
WARNING :ON
from the INIT
AUX
.
A.MENU
ON or OFF with 5/∞.
AUX
between
AUX
).
Section
12
.
A.MENU
between
ON and
59
En