Special Functions; Water Budget; Station Run Time Duration Format; Display Language Option - Irritrol KwikDial Guia Del Usuario

Special Functions

The Special Functions
to various control features and optional display formats.
The special functions are: Water Budget, Station Run
Time Duration Format Option, Display Language Option,
Clock Time Format Option, Program Erase and

Enable/Disable Expansion Port.

Water Budget enables you to conveniently decrease or
increase the run time duration currently set for each
station assigned to a selected program. The adjustment
can be made in 10% increments from 0% (program Off)
to 200% of the normal (100%) run time.
Note: Water Budget is applied to programs A, B and C
independently. For example, applying Water Budget to
program A will not alter the run time duration of any
stations assigned to Program B or C.
1. Turn control dial to the Special Functions
2. Press the button as needed to select the desired
program. The currently set percentage for the
program will be displayed.
3. Press the or
adjustment percentage; i.e., 90% equals a 10%
reduction of station run time and 200% doubles the
station run time.
4. To apply Water Budget to another program, repeat
steps 2 and 3.
5. Turn control dial to the Auto
Note: During operation, the display will show the
16
adjusted run time for each station as it starts running.
dial position provides access

Water Budget

button to select the desired
position when finished.
As a reminder of Water Budget setting (other than 100%),
the % symbol will be displayed with the current time.
See "Important" on page 8 for additional information.
Station Run Time Duration Format Option
The station run time duration can be displayed in either
minutes or hours and minutes format. To change the
current run time format, use the following procedure:
1. Turn the control dial to the Special Functions position.
2. Press the
HH:MM.
3. Press the
format:
MMM = minutes; i.e., 1 hour and 30 minutes is
displayed as 90M.
HH:MM = hours and minutes; i.e., 1 hour and 30
minutes is displayed as 1:30.
4. Turn control dial to the Auto
position.
Various display information can be viewed in any of five
languages: English, Spanish, French, German or Italian.
To change the display language, use the following
procedure:
1. Turn control dial to the Special Functions
2. Press the
3. Press the
language: ESP (Spanish), FRA (French), ITA (Italian)
or DEU (German).
4. Turn the control dial to the Auto
finished.
button as needed to display MMM or
or button to select the desired
position when finished.

Display Language Option

button as needed to display ENG.
or button to select the desired
position when
position.