Lenze L-force 9400 Serie Instrucciones Para El Montaje página 38

4 Electrical installation
Important notes

Stop!
No device protection in the event of too high mains voltages
The mains input is not fused internally.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ

Note!
Switching operations on the motor side of the controller are
permitted for safety switch-off (emergency off).
Please observe:
ƒ
ƒ
38
Destruction of the device if the mains voltage is too high.
Observe the max. permissible mains voltage.
Fuse the device correctly on the supply side against mains
fluctuations and voltage peaks.
When the controller is enabled, switching operations may lead to
a response of the controller monitoring functions.
The switching elements on the motor side must be rated for DC
voltages with U
DCmax
= 800 V.

EDK94ZPM113 DE/EN/FR/ES/IT 1.0