Kit Assembly; Din Radio Provision With Pocket - Metra 99-7610 Instrucciones De Instalación

1. Cut and remove the appropriate tabs not
necessary for your application.
(Figure A)
2. Remove the metal "DIN" sleeve and trim
ring from the aftermarket radio.
3. Slide the sleeve into the Radio Housing
and secure by bending the metal locking
tabs down. (Figure B)
4. Slide the radio into the sleeve until it
"clicks" in. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
6. Attach the trim plate supplied with the
kit to the front of the radio housing
assembly. (Figure C)
7. Reassemble the dash in reverse order
of disassembly.

Kit Assembly 99-7610

DIN radio provision with pocket

Nissan Juke
Nissan Versa
Nissan Juke
(Figure A)
(Figure B)
(Figure C)
4