Kit Assembly - Metra 02-3002 Instrucciones De Instalación

1. Attach the 02-3002 brackets to the Metra
GM J-body kit (sold separately) using
the (2) carriage bolts and (2) Keps nuts
supplied . (Figure A)
Astro / Express / Safari / Savana only:
Peel away the paper backings from the
tape strips and stick the strips to the
lower shelves of the mounting brackets.
(FIgure B)
2. Follow the instructions provided with the
Metra GM J-body kit for installing the radio.
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra. Test the radio
for proper operation.
4. Slide the radio assembly into the dash
until the side clips engage. (Figure C)
5. Reassemble the dash in reverse order of
disassembly.
02-3002

Kit Assembly

(Figure A) (Figure B)
3
(Figure C)