Kit Assembly - Metra 99-8252 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the included panel clips to the
radio housing trim panel. Factory
clips can also be used if desired.
2. Mount the pocket to the radio
brackets with the (4) supplied
#8 x 3/8" Phillips screws. (Figure A)
3. Mount the bracket/pocket assembly
to the housing trim panel with the
remaining (4) supplied #8 x 3/8"
screws. (Figure B)
4. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
6. Mount the new radio assembly into
the dash and reassemble the dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
(Figure C)
99-8252
ISO DDIN radio provision
1. Attach the included panel clips to the
radio housing trim panel. Factory
clips can also be used if desired.
2. Attach the brackets to the radio
housing trim panel using (4) of the
supplied #8 x 3/8" screws.
(Figure A)
3. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble the dash in
reverse order of disassembly.
3
(Figure A)
(Figure B)