Kit Assembly - Metra 95-7424 Instrucciones De Instalación

Kit Preparation
(Figure A)
(Figure B)
Double DIN radio provision
1. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from Metra or
AXXESS. Re-connect the negative battery terminal and test the
unit for proper operation.
2. Snap the Double DIN brackets to the inside edge of the Double
DIN radio housing. (Figure A)
3. Slide the Double DIN radio into the Double DIN bracket/radio
housing assembly and secure the radio to the assembly using
the screws supplied with the radio. (Figure B)
4. Snap the Double DIN trim-plate onto the housing/radio
assembly. (Figure B)
5. Reassemble dash in reverse order of disassembly.
95-7424

Kit Assembly

(Figure A)
(Figure B)
3