Kit Assembly; Din Head Unit Provision - Metra 99-8228 Instrucciones De Instalación

DIN head unit provision

1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Slide the mounting brackets onto the
sides of the radio housing until the side
clips engage. (Figure A)
Note: Tabs are marked left and right.
3. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down. (Figure B)
4. Slide the aftermarket head unit into the
cage and secure. (Figure C)
5. Snap the trim plate into the radio
housing. (Figure C)
6. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-8228

4
(Figure A)
(Figure B)
(Figure C)