Fagor Edesa le031slx Manual De Instalacion Y Uso página 56

4
LEVELLING AND POSITIONING
LEVELLING
The dishwasher must
stand firmly on the floor
and be completely perpen-
dicular. It must be levelled
to correct any possible une-
venness of the floor.
a For this, use a spirit
level.
b
First, level the applian-
ce from back to front;
then, level it from left
to right. The dishwas-
her is level when the
spirit level bubble is
dead centre when pla-
ced in any direction.
POSITIONING
If the appliance is to be
positioned under a wor-
ktop, top can be removed
or left in position.n;
If you wish to remove
c
the top, take out the
counterweight at the
d back and, on some mo-
dels, unfold the sheet
of insulation;
detach the top suppor-
e
ts by pulling them
towards the back.
f
Before siting the dis-
hwasher, move it close
to where it is to be si-
ted and raise it by tur-
ning the back leg until
there is a space of 3
mm between the top
of the appliance and
the base of the wor-
ktop.
a
c
e
g
g Site the dishwasher and
make sure that the pipes
and cable are in the
bottom space at the back
of the dishwasher.
b
d
f
Adjust it up to the worktop
until the top of the
appliance is in contact with
the bottom face of the
kitchen worktop.