Wireless (802.1 1) Setup Problems - HP OFFICEJET 4610 Guía De Instalación Inicial

Solve setup problems
The printer cannot send faxes but can receive faxes
• The printer might be dialing too fast or too soon.
You might need to insert some pauses in the
number sequence. For example, if you need to
access an outside line before dialing the phone
number, insert a pause following the access
number. If your number is 95555555, and 9
accesses an outside line, you might insert pauses
as follows: 9-555-5555. To enter a pause in the
fax number you are typing, press the * button
repeatedly, until a dash (-) appears on the
display.
• If you are having problems sending a fax
manually from a phone that is connected directly
to the printer—and if you are in the following
countries/regions—you must use the keypad on
the telephone to send the fax:

Wireless (802.1 1) setup problems

Note: This section is only applicable to HP
Officejet 4620 e-All-in-One series.
This section provides information about solving
problems you might encounter when connecting the
printer to your wireless network.
Follow these instructions in the order listed.
After resolving the problems...
After you resolve any problems and have successfully connected the printer to your wireless network,
complete the following steps for your operating system:
Windows
1. On the computer desktop, click Start, select
Programs or All Programs, click HP, select
your printer name, and then click Printer
Setup & Software.
2. Click Connect a new printer, and then select
the type of connection you want to use.
Argentina
Brazil
Chile
Colombia
India
Ireland
Korea
Malaysia
Philippines
Portugal
Saudi Arabia
Spain
Thailand
Venezuela
Note: If you are still encountering problems, see
the problem-solving information in the user guide.
(For information about finding the user guide,
see "Where is the user guide?" on page 4.)
Or visit the HP Wireless Printing Center
(www.hp.com/go/wirelessprinting).
Mac OS X
1. Open HP Utility. (HP Utility is located in the
Hewlett-Packard folder in the Applications
folder at the top level of the hard disk.)
2. Click the Applications icon on the HP Utility
toolbar, double-click HP Setup Assistant, and
then follow the onscreen instructions.
23 23
Australia
Canada
China
Greece
Indonesia
Japan
Latin America
Mexico
Poland
Russia
Singapore
Taiwan
USA
Vietnam