Ninja Intelli-Sense CT682SP Serie Manual Del Usuario página 9

USING YOUR TOTAL CRUSHING®
BLENDER PITCHER - CONT�
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: As a safety
feature, if the pitcher
and lid are not properly
installed, the timer will
display "- --" and the
motor will be disabled. If
this happens, repeat step
5 on page 14. When the
pitcher and lid are properly
installed, the program
buttons will illuminate
steadily, indicating the
appliance is ready for use.
NOTE: Smart Vessel
Recognition can detect which
container is on the motor
base. Only the functions
available for a particular
container will illuminate on the
6 If using a pre-set program,
touchscreen.
first select the program
that best suits your recipe.
The pre-set feature will
automatically stop the unit
at the end of the program.
To pause the appliance
at any time, press the
currently active button a
second time. Reference
page 10 for program
descriptions.
15
1-877-646-5288
7 If not using a pre-set
program and ingredients
have reached your desired
consistency, stop the
appliance by releasing the
manual speed button, and
wait for the appliance to
come to a complete stop.
8 To remove the pitcher from
the motor base, turn the
pitcher counterclockwise
and lift it up.
9 To pour out thinner 10 For thicker mixtures
mixtures, ensure the lid is that cannot be emptied
locked in place, then open through the pour spout,
the pour spout cap. remove the lid and
Stacked Blade Assembly
before pouring. To
remove the lid, press the
RELEASE button and lift
the handle. To remove the
blade assembly, carefully
grasp it by the top of the
shaft. The pitcher can then
be emptied.
11 Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit up
and towards you. Refer
to page 31 for storing
instructions.
16
n i n j a k i tc h e n . c o m