Using Your Precision Processor Bowl - Ninja Intelli-Sense CT682SP Serie Manual Del Usuario

USING YOUR PRECISION
PROCESSOR™ BOWL
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
TIP: If the blade assembly
is not fully seated, you will
not be able to install and
lock the lid into position.
TIP: To learn more about
the unit's programs, refer
to page 12.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
NOTE: DO NOT add
ingredients before installing
the blade assembly.
1
Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
21
1-877-646-5288
2 Lower the Precision
Processor bowl onto the
motor base.
3 Rotate Precision 4 Exercising care, grasp the
Processor bowl clockwise Chopping Blade Assembly
™
until it clicks into place. by the top of the shaft
and place it onto the drive
gear inside the bowl. Note
that the Chopping Blade
Assembly will fit loosely
onto the drive gear.
5 Add ingredients to the
bowl, making sure not to
exceed the MAX LIQUID
and MAX FILL lines.
22
n i n j a k i tc h e n . c o m