Ninja Intelli-Sense CT682SP Serie Manual Del Usuario página 13

USING YOUR PRECISION
PROCESSOR™ BOWL - CONT�
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
NOTE: Please follow the
same instructions to install the
Dough Blade Assembly.
NOTE: Smart Vessel
Recognition can detect which
container is on the motor
base. Only the functions
available for a particular
container will illuminate on the
touchscreen.
6 Place lid on Precision
Processor Bowl, with
black line on tab aligned
slightly to the right of tab
on front of bowl. Turn lid
clockwise to lock in place.
When properly locked,
the white line on lid will
line up with the black line
on bowl. When the unit is
connected to power and
the container is correctly
locked onto the motor
base,
Power symbol to turn unit
on. The available program
buttons will illuminate and
the unit will be ready for
use.
23
1-877-646-5288
7 If using a pre-set program,
first select the program
that best suits your recipe.
The pre-set feature will
automatically stop the
appliance at the end of
the program. To pause the
unit at any time, press the
currently active program
a second time. Reference
page 12 for program
descriptions.
press and hold
8 To remove the bowl from 9 Remove the lid by pressing
the motor base, turn the the release button on the
bowl counterclockwise front tab, twisting the lid
and then lift it. counterclockwise, and
lifting up. Always remove
the Chopping Blade
Assembly before emptying
any of the ingredients in
the bowl. To remove the
Chopping Blade Assembly,
carefully grasp it by the top
of the shaft and lift it out of
the bowl.
10 Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit up
and towards you. Refer
to page 31 for storing
instructions.
24
n i n j a k i tc h e n . c o m