Alarm Function; Radio Functions - SOUNDMASTER highline URD 840 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5.3

Alarm function

This function is available in CD, AM/FM and BUZZER mode. Two time slots
are available (ALARM1 and ALARM2).
● Switch the appliance off.
● Slide the FUNCTION switch (16) to the desired position (CD, AM/FM or
BUZZER). Adjust the volume.
- For AM/FM alarm, tune to the desired radio station
● Press the ALARM1 button (3) to set ALARM1. The clock display flashes.
● Press the HOUR and MINUTE buttons (13 and 14) to set the desired time,
and press the ALARM1 button to confirm the setting. The ALARM1
indicator (21) is ON.
● Press the ALARM2 button (2) to set ALARM2. The clock display flashes.
● Press the HOUR and MINUTE buttons (13 and 14) to set the desired time,
and press the ALARM2 button to confirm the setting. The ALARM2
indicator (22) is ON.
● To cancel the alarm, press the ALARM1 or ALARM2 button once.
Snooze alarm
The default snooze time is: 6 minutes.
● To snooze the alarm, press the SNOOZE button (20) once. The SNOOZE
indicator (26) is ON, and the ALARM indicator flashes. The alarm sounds
again after the snooze time has elapsed.
● To stop the alarm, press the ON/OFF button (17). The alarm is
automatically set for the next day.
5.4

Radio functions

● To select the radio band, slide the FUNCTION switch (16) to the AM or FM
position.
● To select a frequency or radio station, turn the TUNING dial (15) until the
desired frequency is set.
To improve the reception of the FM frequency, extend the aerial
i
antenna. To improve the reception of the AM frequency, turn the
appliance.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido