Scubapro Aladin 2G Manual De Usuario página 138

11. Settings
Enabling two-gas diving
1. Confirm that you wish to enable two-
gas diving by pushing
"off" starts to flash.
"On" indicates the deco gas is active,
"off" indicates that only gas 1 will be
used for decompression calculations.
2. Switch between "on" and "off" with
.
3. Confirm your choice with
PDIS (Profile Dependent Intermediate
Stop)
1. Confirm that you wish to enable PDIS
by pushing
flash.
"On" indicates that the PDIS timer will
be automatically activated during the
dive, "off" indicates that PDIS will be
inactive.
2. Switch between "on" and "off" with
.
3. Confirm your choice with
60
Selecting the units
1. Confirm that you wish to change the
. "On" or
2. Push
3. Switch with
4. Confirm the selected unit with
5. Switch with
.
6. Confirm the selected unit with
Selecting the water type
1. Confirm that you wish to change the
. "On" or "off" starts to
2. Switch with
.
units by pushing . The selected
units are displayed (m / ft / °C / °F).
. "m" or "ft" starts to flash.
between "m" and "ft".
"°C" or "°F" starts to flash.
between "°C" and
"°F".
selected water type by pushing
"On" or "off" starts to flash.
"Salt on" indicates salt water, "salt off"
indicates fresh water.
between "salt on"
and "salt off".
Confirm the water type with
.
.
.
.
SCUBAPRO ALADIN 2G