Menu "Set 2 - Scubapro Aladin 2G Manual De Usuario

11.3 Menu "set 2"

With menu "set 2" or SmartTRAK you can configure the following items:
Setting
• Alarm clock
• UTC (Universal Time Change)
zone
• Time of day
• 24 or AM/PM setting
• Date
• Display contrast
• IrDA speed setting (only "set 2") low / high
• Sound
• Show Aladin 2G electronic ID
Starting from the time of day display push
or until "set 2" appears.
Confirm that you wish to enter into the
menu of "set 2" by pushing
Once entered into the menu you can scroll
with and
Setting the alarm clock time
The alarm clock goes off only at the surface.
"Sound" must be turned "on" in "set 2".
1. Confirm that you wish to set the alarm
time by pushing
The hours start to flash.
2. Set the hours by pushing
.
3. Confirm the setting with
minutes start to flash.
4. Set the minutes by pushing
.
5. Confirm the setting with
"off" starts to flash.
SCUBAPRO ALADIN 2G
Range
0 - 23h 59min, on/off
±13hrs, increments: 15min
hours:minutes
24 (off) / AM/PM (on)
1 (low) -12 (high)
on / off
6. "On" indicates "activated" (time of day
NO
7. Confirm the selected status with
Setting the UTC offset (coordinated
universal time)
.
through the menu.
This setting allows you to quickly set the
watch to a new time zone without affecting
the actual time setting.
1. Confirm that you wish to set the UTC
2. Set the hours by pushing
.
3. Confirm the setting with
or
4. Set the minutes in increments of
. The
5. Confirm the selected status with
or
. "On" or
Default
12:00, off
4
low
on
display shows ), "off" indicates
"deactivated".
Switch between "on" or "off" by press-
ing .
offset by pushing .
The hours start to flash.
(±13hrs).
minutes start to flash.
15 minutes by pushing
11. Settings
Page
63
63
64
64
64
64
65
65
65
.
or
. The
or .
.
63