Menu "Set 3" (Apnea) - Scubapro Aladin 2G Manual De Usuario

Ocultar thumbs Ver también para Aladin 2G:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 151
11. Settings

11.4 Menu "set 3" (Apnea)

With menu "set 3" or SmartTrak you can
configure the following items:
Setting
Range
Dual Depth
5-100m,
alarm
5-100m,
on/off
Incremental
5-100m,
depth alarm
dn(down)/ up/
bth(both)/off
Dive time
15s-10min,
interval
on/off
warning
Surface
15s-10min,
interval
on/off
warning
Ascent
0.1-5 m/s,
speed alarm
(1-15 ft/s)
on/off
Water
1.000-1.050
density
kg/l
(Fresh water
~1.000,
Ocean
~1.035)
Starting from the time of the display push
or
until "set 3" appears.
Confirm that you wish to enter into the
menu of "set 3" by pushing
Once entered into the menu you can scroll
with
and
Setting the Dual Depth alarm
With this alarm you can set two independent
depth alarms.
1. Confirm that you wish to change the
settings of the Dual Depth alarm by
66
2. Scroll first depth with
3. Confirm the first depth alarm with
Default
Page
4. Scroll second depth with
10m (35ft), off
66
20m (65ft), off
5. Confirm the second depth alarm with
5.0m (20ft), off
66
6. Switch between on/off with
7. Confirm the setting with
Setting the incremental depth alarm
30s, off
66
1 min, off
67
With this alarm you can set repetitive depth
alarms at given depth increments.
1 m/s (3 ft/s),
67
1. Confirm that you wish to change the
off
1.025 kg/l
67
2. Scroll value with
3. Confirm the increment with
4. Switch between Up/Down/Both/Off with
5. Confirm the setting with
Setting the dive time interval warning
.
through the menu.
With this alarm you can set time alarm that
repeats on given intervals.
1. Confirm that you wish to change the
2. Scroll time value with
3. Confirm the interval time with
4. Switch between on/off with
5. Confirm the setting with
pushing
. First depth value starts
to flash.
or
Second depth alarm starts to flash.
.
. On/off starts to flash.
settings of the incremental depth alarm
by pushing
. Increment value
starts to flash.
or
Down/Both/Off starts to flash.
.
settings of the dive time interval warning
by pushing
. Interval value starts to
flash.
or
off starts to flash.
.
.
or
.
.
.
. Up/
.
.
. On/
.
.
SCUBAPRO ALADIN 2G

Publicidad

Tabla de contenido
loading

Tabla de contenido