Scubapro Aladin 2G Manual De Usuario página 140

11. Settings
Resetting the remaining saturation
WARNING
Diving after a reset of the remaining saturation
may lead you into potentially hazardous
situations which could result in death or
serious injury.
After a reset of the remaining saturation do not
dive for at least 48 hours.
If you dive after resetting the remaining
saturation the computer will miscalculate your
decompression, which may result in serious
injury or death. Reset the remaining saturation
only if you know you will not be diving, flying or
going to higher altitude for the next 48 hours.
Resetting the desaturation should only be
done when there is a valid reason, e.g.
loaning the computer to somebody who
has not dived in 48 hours or more. When
the computer itself has remaining saturation
you must assume full responsibility for the
consequences of resetting the remaining
saturation.
DESAT
DESAT
1. Confirm that you wish to reset the
displayed saturation by pushing
"On" starts to flash.
2. Switch between "on" or "off" by press-
ing .
3. Confirm the setting with
have selected "off", "Code" and "000"
appear.
62
4. Set the first digit by pushing
. Confirm with
Repeat point 4 for the next 2 digits. If you
entered the right code the desaturation will
be reset to zero (desat off). Code: 313
.
. If you
and
.
SCUBAPRO ALADIN 2G