The label on the
inner left side
C
indicates the type
of gas used in the
product.
1.1.2 For models with water dispenser
Pressure for cold water inlet shall be maximum
•
90 psi (6.2 bar). If your water pressure exceeds
80 psi (5.5 bar), use a pressure limiting valve in
your mains system. If you do not know how to
check your water pressure, ask for the help of a
professional plumber.
If there is risk of water
•
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation. Consult Professional plumbers
if you are not sure that there is no water hammer
effect in your installation.
Do not install on the hot water inlet. Take
•
precautions against of the risk of freezing of the
hoses. Water temperature operating interval
shall be 33°F (0.6°C) minimum and 100°F (38°C)
maximum.
Use drinking water only.
•
6