Transportation And Storage - Siemens BG Serie Instrucciones Para El Manjeo

1 Description
Motor types:
In the case of the base motors the feet are screwed or cast on the
motor housing.
The screw-fitted feet on the motor housing can be changed
over to alter the position of the terminal box (see Fig. 2). The thread
in the existing drillholes in the motor housing can be tapped to fasten
the motor feet in retrospect. However, the stand surface of the feet
must be remachined and aligned afterwards and shims fitted, if
necessary.
The brake connection cable is also to be considered in the case of
brake motors!
2

Transportation and Storage

ã
Siemens AG 2003 All Rights Reserved
£
3 Comissioning
P
5