Clarity XLC2+ Guia Del Usuario página 18

Ocultar thumbs Ver también para XLC2+:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

XLC2+
HANDSET
The batteries in the handset must be fully charged for 16 hours before
using the telephone for the first time.
Battery life: Talk time is 6.5 hours, while standby is 130 hours without
usage. Actual times will vary depending on the amplifier settings
used. Replace batteries every two years.
Battery spec (as supplied with your phone): 3xAAA NiMH rechargeable
batteries (1.2V 600mAh NiMH - model 60AAAHC, GPI International Ltd.
or KH-44AAA-J600, Yiyang Corun Battery Co., Ltd)
To replace batteries, remove the handset battery cover and install
new batteries, then close battery cover.
BASE
The base backup batteries ensure the functionality of your cordless
phone (3-4 hours), in case of a power outage.
The batteries in the base must be fully charged for 16 hours.
When the base unit operates in battery mode (no AC power). the base
POWER light will blink once every two seconds.
To change or install batteries in the base:
1. Turn base over and remove memory card.
2. Open battery compartment door - push in the direction of the
arrow.
3. Install batteries according to the polarity shown inside the battery
compartment.
16
Battery Information

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xlc2

Tabla de contenido