Descargar Imprimir esta página

Electrolux EPI09NLIW Manual De Instrucciones página 10

Ocultar thumbs Ver también para EPI09NLIW:

Publicidad

Idiomas disponibles

Idiomas disponibles

Press this button in COOL or HEAT mode to
put the fan into the high speed Turbo mode
and the air conditioner will work at maximum
power.
The Turbo symbol
remote control.
Turbo function will be cancelled if the Turbo
button is pressed again, or if the mode or fan
speed is changed.
Press this button, the horizontal louver will
swing up and down automatically, and
be displayed on the remote control.
Press again to cancel it and the louver will
stay at its last position.
Press this button, the vertical louver will
swing left to right automatically, and
displayed on the remote control.
Press again to cancel it and the louver will
stay at its last position.
Press this button the indoor fan operates at
ultra-low speed, the indoor noise is low.
symbol will be displayed on the remote
control once the Quiet function is activated.
Quiet function and Turbo function can not be
activated at the same time.
Quiet function will be cancelled if the Quiet
button is pressed again, or if the mode or fan
speed is changed.
Pressing this button to select sleep mode ,
sleep mode
Sleep mode.
STOP
In COOL or DEHUMIDIFY mode, the set
temperature will increase 1°C after an hour,
and increase another 1°C after 2 hours, then
continue to run at this setting.
9
will be displayed on the
, sleep mode
and cancel the
In HEAT mode, the set temperature will decrease
1°C after an hour, and decrease another 1°C after
2 hours, then continue to run at this setting.
Set
Temperature
will
Set
Temperature
will be
In this mode, the air conditioner will run according
to a preset sleep temperature curve.
In COOL mode
(1) When setting the initial temperature between
the temperature will increase 1°C every hour,
after 7 hours, the temperature will be
decreased a further 1°C, after that the unit will
keep running at this temperature;
(2) When setting the initial temperature between
24-27°C, after turning on the Sleep function,
the temperature will increase 1°C every hour,
after 2°C the temperature will be maintained,
after 7 hours, the temperature will be
decreased a further 1°C, after that the unit will
keep running at this temperature;
28-29°C, after turning on the Sleep function,
hour, after 7 hours, the temperature will be
decreased a further 1°C, after that the unit will
keep running at this temperature;
(4) When setting the initial temperature to
decreased 1°C, after that the unit will keep
running at this temperature.
1 hour
1 hour
1 hour
1 hour

Publicidad

loading

Este manual también es adecuado para:

Epi12nliw