Publicidad
Idiomas disponibles
Idiomas disponibles
Use a dry cloth to wipe the indoor unit and
remote control.
A cloth dampened with cold water may be used
on the indoor unit if it is too dirty.
The front panel of the indoor unit cant be
removed and cleaned with water. Then wipe
with a dry cloth.
Do not use brushes, emery paper or burnishes
to clean the unit because it may cause
damages.
Do not use a chemically treated cloth or duster
to clean the unit.
Do not use benzine, thinner, polishing powder
or similar solvents for cleaning. These may
cause the plastic surface to crack or deform.
Never use warm water over 40ºC to clean
the front panel, it may cause deformation or
discoloration.
Note: Supply power must be disconnected
before cleaning.
month or more often if necessary.
1 Lift the indoor unit front panel up to an angle
until it stops with a full support from the frame.
21
indoor unit.
or water, then dry it up in cool place.
Clean with vacuum cleaner if possible.
position.
Publicidad
