Publicidad
Idiomas disponibles
Idiomas disponibles
The Swing-V and Swing-H buttons will be
disabled when the air conditioner is not in
operation (even if the Timer On is set).
Do not operate the air conditioner for long
in COOL or DEHUMIDIFY mode.
Otherwise, condensate may occur on the
surface of the horizontal louver and drop
Do not move the horizontal louver and
vertical louver manually. Always use the
Swing-V and Swing-H buttons. Moving the
louvers manually may cause malfunction
during operation. If the louver malfunctions,
stop the air conditioner and restart it.
Open angle of the horizontal louver should
not be set too small, as cooling or heating
performance may be impaired due to too
Do not operate the air conditioner with
horizontal louver in closed position.
When the air conditioner is connected to
power (initial operation), the horizontal louver
may generate a sound for 10 seconds, this is
a normal operation.
When the remote control is lost or fails to operate,
please use the manual switch on the indoor unit.
The air conditioner will operate in AUTO mode and
the temperature setting or fan speed can not be
changed.
1 Open the front panel.
2 Press the Manual Control button to enter
AUTO mode. The air conditioner will select the
mode of COOL, HEAT (heat pump model only)
and FAN automatically according to the room
temperature for reaching the best comfort.
19
Manual control
button
Press the Manual Control button again to turn
the air conditioner off.
The operation mode is seen in the following
table.
AUTO
Cooling
AUTO
Heat pump
AUTO
Heat pump
20°C (HEAT)
The operation temperature range is as below:
Maximum Cooling
Minimum Cooling
Maximum Heating
Minimum Heating
The operation temperature range (outdoor
temperature) for cooling only model is 16ºC~48ºC,
If the air conditioner is used outside of the above
conditions, certain safety protection features may
come into operation and cause the unit to function
abnormally.
Manual control button
Fan
AUTO
AUTO
AUTO
21/–
27/–
24/18
20/–
Publicidad
