Do not touch or try to clean the Cold Plasma
Generator by yourself, and it may cause electric
shock.
service center for clean or replacement if
necessary.
If the air conditioner is not going to be used for a
long period of time:
Operate in FAN only mode for 1~2 hours to
allow the unit to completely dry out.
Switch off the unit and pull out the power plug.
Remove the batteries from the remote control.
The outdoor unit requires periodic
maintenance and cleaning. Do not attempt to
do this yourself. Contact your dealer or service
technician.
Check that the wiring is not broken or
disconnected
Check if the air outlet or inlet is blocked if the
air conditioner has not been used for a long
time.
Do not touch the metal parts of the unit when
handling sharp metal edges.
Do not use water to clean inside the air
conditioner. Exposure to water can destroy
the insulation, leading to possible electric
shock.
the power and circuit breaker are turned off.