Rear-Facing Installation With Latch; Latch - Graco Size4Me Manual Del Proprietário

REAR-FACING INSTALLATION WITH
1. Pull out on handle on front of child
restraint (a) and adjust to
position 1 (b)
forward-facing
(see fig. c, pg. 37)
2. Place rear-facing
equipped with
3. For ease of installation, extend

LATCH

belt to its maximum length.
4. Attach rear-facing
flat and not be twisted. Pull connectors
to be sure they are securely attached to
the anchor points. (d).
5. Press down firmly in center of child
restraint while pulling
adjustment belt through slot in
seat pad (e).
adjustment belt is outside the seating
area (f).
rear-facing
LATCH belt is stored.
LATCH anchors.
connectors to
(c). Belt must lie
LATCH
a
CLICK!
c
Slot
e
18
LATCH
b
d
f