User Level Programming; Language; Front Led Lights; Led Body Lighting - Bezzera VICTORIA Manual De Instrucciones

5.12 User level programming

To access the user level programming, open the
drop-down menu and press the cog symbol
The display will show the following screen
If the PASSWORD option is set to ON to access
the user menu, the user will be asked to enter the
PASSWORD (1901 customisable).
This option combined with DOSE SETTING set to
OFF prevents the creation and/or editing of pro-
files, allowing the user only to view and use the
existing profiles.

5.12.1 Language

A language can be selected from those available.
By pressing the display, the following screen will
be shown:
Select the preferred language by pressing the re-
levant key. Press OK to save the change.

5.12.2 Front LED lights

It is possible to turn on, turn off or adjust the lights
in the dosing area. You can access the relevant
submenu by pressing the "LED Front" key. The
intensity of the LED lights can be adjusted here.

5.12.3 LED body lighting

It is possible to access, turn off or change the LED
lighting colour under the machine. You can ac-
cess the relevant submenu by pressing the "LED
Body" key
You can select one of three existing colours here
or more than one simultaneously to mix them.
You can also change the intensity of the LED
lights.

5.12.4 Scheduled maintenance

You can select a number of doses above which
the machine will trigger an alarm by pressing the
"MAINTENANCE" key.
46
BEZZERA VICTORIA
MOD.