Burning Wood (Tai M) - Dovre TAI 45M Instrucciones De Instalacion Y Uso

= Open
o

Burning wood (TAI M)

After you have followed the instructions for lighting:
1. Slowly open the door of the appliance.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Stack a few logs on the charcoal.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
18
09-20020-355
= Closed
l
09-20500-017
you want to use the stove for a short while, make an
open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn more
slowly as the oxygen can only reach some logs eas-
ily. If you want to burn wood for a longer period, make
a compact stack.
4. Close the door of the appliance.
5. Close the primary air inlet and leave the secondary
air inlet open.
Maximum amount of wood (TAI M)
To stoke continuously at the rated power, wood must
be added every 45 minutes. If you use a smaller
amount of wood each time, you can add wood more
often. Each stove is designed to work with a specific
maximum amount of wood. If you use a larger quantity
of wood, the heat output increases. This can cause
the hearth to be overloaded and parts can be dam-
aged.
Allowable amount of fuel when using wood
with a moisture content of 15%:
TAI 45M 9 kW can be filled with a maximum of
2.2 kg wood every 45 minutes.
TAI 55M 11 kW can be filled with a maximum
of 2.6 kg wood every 45 minutes.
Subject to change because of technical improvements
09-20500-018