FAAC SAFEzone RETROFIT KIT Guía Rápida De Inicio página 22

Display Basic Function
Cd
DELAY FOR CLOSING LEAF (visualised only with the function
Is the delay time for starting leaf 1 closing with respect to leaf 2. Makes it
possible to avoid overlapping of the two leaves.
Adjustable from
Next the value 59, the viewing changes to minutes and tenths of a second
(separated by a decimal point) and time is adjusted in 10-second steps up to
the maximum value of
e.g.: if the display shows
bu BUS-2EASY
1. Register: keep
display flashes during this time).
Y
2. will appear once confirmation of the completed registration is given.
3. Release
on the display.
Opening photocells:
ON = registered and committed
Opening and
closing photo-
cells:
ON = registered
and committed
M2 MOTOR 2 dead-man DRIVE mode (visualised only with the function
Mn 2
= )
+/R1
OPENS (visualising
-/R2
CLOSES (visualising
M1 MOTOR 1 dead-man DRIVE mode
+/R1
OPENS (visualising
-/R2
CLOSES (visualising
tL WORK TIME LEARNING (SETUP):
See the related paragraph.
SAFEzone RETROFIT KIT
00 59
to sec, in 1- second steps.
3
minutes.
1.2
, the time is 1 min and 20 sec
DEVICES ENTRY:
-
+
and pressed simultaneously for at least 5 s (the
-
+
and . The status of the BUS-2EASY devices will appear
Closing photocells:
ON = registered and committed
oP
) until the button is held down
cL
) until the button is held down
oP
) until the button is held down
cL
) until the button is held down
Encoder 1: ON = connected and
registered correctly
BUS Status:
Always ON
Encoder 2: ON =
connected and
OPEN Photocell:
ON = registered and committed
6
Default
Mn 2 05
= ):
no
registered
correctly
--
--
--
532037 - Rev. B