FAAC SAFEzone RETROFIT KIT Guía Rápida De Inicio página 23

Display Basic Function
St AUTOMATED SYSTEM STATUS:
You can exit programming, choosing whether or not to save the configuration
you just performed.
1. set the choice:
Y
to SAVE and EXIT the programming
no
to EXIT the programming WITHOUT SAVING
2. press the button F to confirm; at the end the display returns to visualize
the automated system status:
00
= CLOSED
01
= OPEN
02
= Stationary then "OPENS"
03
= Stationary then "CLOSES"
04
= In "PAUSE"
05
= during Opening
06
= during Closing
WARNING If power is lost to the board prior to confirmation (step
2.), all changes made will be lost.
+
-/R2 F
SAFEzone RETROFIT KIT
You can EXIT programming at any time: press and hold F and
then also - to switch directly to
07
= FAIL SAFE in progress
08
= checking BUS-2EASY
09
= Pre-flash then "OPENS"
10
= Pre-flash then "CLOSES"
11
= Emergency open
12
= Emergency close
HP
= Hold position
St
.
7
Default
Y
devices in progress
532037 - Rev. B