FAAC SAFEzone RETROFIT KIT Guía Rápida De Inicio página 30

USEFUL PARAMETERS FOR PROTECTING FROM THE RISK OF IMPACT/
CRUSHING OF THE MAIN EDGE
PARAMETER
F1
F2
En
Cd
bo
r1
r2
EC
rB
SAFEzone RETROFIT KIT
FUNCTION
To adjust the static thrust force of motor 1.
NOTE: For hydraulic operators, set the force value to maximum and adjust
using the by-pass screws
To adjust the static thrust force of motor 2.
NOTE: For hydraulic operators, set the force value to maximum and adjust
using the by-pass screws
Enables encoder reading by the control board, guaranteeing reversed move-
ment in case of an obstacle (Set
To modify the closing delay of motor 1, creating an offset of the two leaves and
reducing the risk of crushing between the two moving leaves
You can set the starting time. During start the motors work at maximum power
for starting the movement (ignoring the power level selected with
To adapt the decelerated speed space of leaf 1. Impact at decelerated speed
reduces dynamic force.
To adapt the decelerated speed space of leaf 2. Impact at decelerated speed
reduces dynamic force.
To adjust the sensitivity of reversed movement in case of an obstacle.
To modify the space preceding the mechanical stops in which the board does
not command reversed movement (set a value ranging from 1 to 49 mm).
EN=Y
)
14
F1 F2
and ).
532037 - Rev. B