Important Safeguards - Tornado M Serie Manual Del Usuario

Your new Floor Machine will afford you many years of trouble-free operating satisfaction provided it is
given proper care. Prior to packaging your Floor Machine was inspected by a Quality Control Techni-
cian.
UNCRATING
Your Floor Machine was protectively packed to prevent
damage in shipment. We suggest that upon removing
the unit from its carton you carefully inspect it for any
possible damage in transit. If damage is discovered,
immediately notify the transportation company who
delivered your machine. As a manufacturer, we are
unable to ace upon any claim for concealed damage:
you must originate the claim.

IMPORTANT SAFEGUARDS

This machine is designed to be safe when used to
perform the functions specified in this Operator's
Manual. Should damage occur to electrical or
mechanical parts, the machine should be repaired by
the manufacturer or competent service center before
using in order to avoid further damage to the machine
or physical injury to the user. Your floor machine is
equipped with a safety switch lockout device designed
for your safety. Do not attempt to bypass or defeat the
safety lockout device. Never use any device to lock the
power switch in the ON position.
WARNINGS
READ THIS OPERATOR'S MANUAL!
WARNING: You must have training in the operation of
this machine before using it.
WARNING: Machines can burn flammable materials
and vapors. Do not use this machine with or near
fuels, grain dust, solvents, thinners or other flammable
materials.
WARNING: Do not operate this machine unless it is
completely assembled.
WARNING: Do not use this machine as a step or to
move furniture.
WARNING: When disconnecting power cord from
electrical outlet, grasp the plug. Pulling it out by the
cord itself can damage cord insulation and internal
connections to the plug. To prevent electric shock,
always remove the electrical plug from the electrical
outlet before doing any repairs or maintenance to this
machine.
.WARNING: To prevent injury, always remove the
electrical plug from the electrical outlet before changing
the polishing pad and before leaving the machine.
WARNING: To prevent injury, keep hands, feet, and
loose clothing away from the rotating pad.
WARNING: Maintenance and repairs must be done by
authorized personnel only.
WARNING: Keep all fasteners tight. Keep
adjustments according to specification.
WARNING: Keep the electrical parts of the machine
dry. For storage, keep the machine in a building.
WARNING: Always use a three-wire electrical system
connected to the electrical ground. For maximum
protection against electric shock, use a circuit that is
protected buy a ground fault circuit interrupter. Consult
with your electrical contractor.
WARNING: To prevent damage to the power cord, do
not let the pad, pad driver or wheels touch the power
cord when the machine is running. Always lift the
power cord over the machine.
WARNING: Make sure all labels, decals, warning,
cautions and instructions are fastened to the machine.
WARNING: To avoid fire, do not use unit with a
flammable or combustible liquid to clean floor.
These guidelines are presented for your protection and
convenience. Please read them carefully, since a failure
to heed these precautions could result in discomfort or
injury. When using an electrical appliance, basic safety
precaution should always be followed
5