Leroy-Somer VARMECA-20 Instrucciones De Parametrización página 64

LEROY-SOMER
COMMISSIONING THE PEGASE VMA 20 PC PARAMETER SOFTWARE
3.3.2.7 - Printing the settings
Click the button
The settings appear in the form of a table:
Note: in the "Print" menu, parameters cannot be modified.
3.3.2.8 - Using the settings tables
The settings table in the "Print" menu can only be used in the PEGASE software.
The key will allow the parameters to be saved to an EXCEL file.
Note: it will not be possible to use this file to set the parameters on a VARMECA 20. To do this it will be essential to return to the
file saved in PEGASE (section 3.3.2.5).
The following window appears:
62
PARAMETER SETTING MANUAL
VARMECA 20
Variable speed motors and geared motors
3532 - 05.2004 / f
Parameter references in
the VARMECA software
Parameter references in
the CDC VMA20
Console
Click here